Search results for "Incandescent light bulb"
showing 9 items of 9 documents
Determining the efficiency of optical sources using a smartphone's ambient light sensor
2017
This work reports the use of a smartphone’s ambient light sensor as a valuable tool to study and characterize the efficiency of an optical source. Here, we have measured both luminous efficacy and efficiency of several optical sources (incandescent bulb and halogen lamp) as a function of the electric power consumed and the distance to the optical detector. The illuminance of LEDs as a function of the distance to the optical detector is characterized for different wavelength emissions. Analysis of the results confirms an inverse-square law of the illuminance with the detector–source distance and shows good agreement with values obtained by classical experiments. This experience will trigger …
Diagnostics of capillary light sources by means of line shape measurements and modeling
2012
In this work the Hg visible triplet spectral lines were measured by means of Fourier Transform spectrometer and deconvoluted by Tikhonov's regularisation method and line shape modelling. The lines were collected from Hg/Ar and Hg/Xe high frequency capillary lamps. In our previous work, the spatial plasma homogeneity of isotope Hg/Xe and Hg/Ar capillary lamps was investigated by means of tomography. The lamps were operated in different working positions – horizontally and vertically. In this work the spectral diagnostics of capillary light sources by means of spectral line shape measurements and modelling is presented to obtain plasma temperature. The results are compared with the results fo…
Light transmission of the human lens and its relation with aging
2011
Purpose To determine the visible light transmission of the human crystalline lens of persons of different ages, using both solar and incandescent illumination. Methods The spectral transmission of lens was measured by using the Perkin-Elmer 800 UV/VIS spectrophotometer. With these data we calculated the percentage of visible light transmission for solar illumination, simulated by the CIE D65 illuminant, and for incandescent illumination (A illuminant). Results The total amount of visible light transmitted by nine crystalline lenses is represented as a function of age: with solar illumination and with incandescent illumination and the comparison between both illuminants.In general, the amoun…
Age‐induced change in the color of the human crystalline lens
2011
Purpose To determine the chromatic coordinates of different human crystalline lenses to analyze the age-induced change in the color of the crystalline. Methods The spectral transmission of nine human crystalline lenses of different ages were measured by using a Perkin-Elmer 800 UV/VIS spectrophotometer. Using these data we calculated the chromatic coordinates of each crystalline lens for both solar and incandescent illumination. The study adheres to the tenets of the Declaration of Helsinki for Research Including Human Subjects and was approved by the Institutional Review Board. Results The results show a greater saturation of color with the increase of age. In principle, the change tends t…
Light transmission and ultraviolet protection of contact lenses under artificial illumination
2016
Purpose: To determine the spectral transmission of contact lenses (CLs), with and without an ultraviolet (UV) filter to evaluate their capacity for protection under UV radiation from artificial illumination (incandescent, fluorescent, xenon (Xe) lamps, or white LEDs (light-emitting diode)). Methods: The transmission curves of nine soft CLs were obtained by using a PerkinElmer Lambda 35 UV-vis spectrophotometer. A CIE standard was used for the emission spectra of incandescent and fluorescent lamps, and Xe lamps and white LEDs were measured by using an International Light Technologies ILT-950 spectroradiometer. Results: Five of the nine soft CLs analysed state that they incorporate UV filters…
RGB Photoelasticity: Review and Improvements
2010
: This paper considers the main developments of RGB photoelasticity with reference to the maximum measurable retardation. In this paper, a new procedure based on the standard error function evaluated on a subset of the calibration array is also proposed and experimentally tested. The experiments show that the filament lamp makes it possible to find retardations until approximately 4 fringe orders while the fluorescent lamp makes it possible to determine higher fringe orders (12 fringe orders in this paper) owing to the discrete spectrum of the source. The paper shows that, by using the incandescent lamp, the primary limiting factor is the lack of modulation of the R, G and B signals wherea…
PERANCANGAN ALAT UKUR INTENSITAS CAHAYA BERBASIS ARDUINO LEONARDO MENGGUNAKAN SENSOR LDR (Light Dependent Resistor)
2020
Lux meter is a device used to measure the intensity of light in an area. The purpose of this thesis is to design a light intensity measuring device using LDR components as a light sensor, comparing light intensity measuring devices made using LDR sensors and Arduino Leonardo based microcontrollers with standard tools. The data used in this study are primary data. The data obtained is then processed using MS. Excel. The type of light bulbs used are Philips CFL (Philips Essential) lamps, each lamp having a power of 5, 8, 11, 14, 18, 23, 27, 32, 35, and 50 watts with a luxmeter vertical distance of 1, 2 and 3 meters from the lamp.
 From the results of testing the tools and processing of c…
Spectral Transmittance of Intraocular Lenses under Natural and Artificial Illumination
2011
Purpose To compare the spectral transmission of different intraocular lenses (IOLs) with either ultraviolet (UV) or blue-light filters, and to analyze the performance of these filters with artificial light sources as well as sunlight. Design Experimental study. Methods The spectral transmission curve of 10 IOLs was measured using a PerkinElmer Lambda 800 UV/VIS spectrometer (Waltham, MA). Different filtering simulations were performed using the D65 standard illuminant as daylight and standard incandescent lamp and fluorescent bulb illuminants. Main Outcomes Measures Spectral transmittance of the IOLs. Results All the IOLs studied provide good UVC (200–280 nm) and UVB (280–315 nm) protection…
Internal heat gain from different light sources in the building lighting systems
2017
EU directives and the Construction Law have for some time required investors to report the energy consumption of buildings, and this has indeed caused low energy consumption buildings to proliferate. Of particular interest, internal heat gains from installed lighting affect the final energy consumption for heating of both public and residential buildings. This article presents the results of analyses of the electricity consumption and the luminous flux and the heat flux emitted by different types of light sources used in buildings. Incandescent light, halogen, compact fluorescent bulbs, and LED bulbs from various manufacturers were individually placed in a closed and isolated chamber, and t…